|
(as of
September 29, 2006)
AESP Technology Symposium Agenda
Host Utility: Southern California Edison
Thursday, October 12, 2006
7:00 a.m. or 7:45 a.m.
Catch the bus to Southern California Edison’s Customer Technology Center (CTAC) at 7:00 a.m. or 7:45 a.m.
in front of the Hilton Garden Inn. (please see www.aesp.org for hotel information.
CTAC: 6090 N Irwindale Ave Irwindale, CA 91702
7:30
a.m. – 8:30 a.m. (Foyer)
Registration
and Continental Breakfast
8:30
a.m. (Conference Center)
Welcome
– Meg Matt, Executive Director of AESP and Brad Kates, President of AESP and Opinion Dynamics Corporation
8:45
a.m.
Moderator:
Jay Zarnikau, Frontier Associates
The
Integration of Energy Efficiency and Demand Response: A New Frontier
Mark S. Martinez,
Manager, Demand Response Program Development, Southern California Edison
9:15 a.m.
Moderator:
Jay Zarnikau, Frontier Associates
Incorporating
the Latest Technologies into your Programs
Rachel
Reiss Buckley, Manager, Technology Assessment Services and Lynn Stein, Director, Efficiency and Technology Services, E Source
This session will help you evaluate
whether the latest energy efficiency and demand response technologies are
right for you. Come hear the unbiased 20,000-foot view of the newest
efficiency and demand response technologies to hit the market, as well as
receive tips about how to design your programs. The speakers will also share
some insight into how E source
performs its world-class independent technology reviews to help you
effectively assess what you learn during the remainder of the Symposium.
10:00 a.m. Networking Break (Commercial Center)
Let the mingling begin. Visit the Technology Partners and each other during the first of several networking breaks.
10:30 a.m. (Conference
Center)
Moderator: Mike Stockard, TXU Electric Delivery
Before
You Write That RFP – Issues and Advice on Demand Response Program Planning:
A Panel Discussion
Dan
Merilatt, Vice President, Program Services, GoodCents
Masoud
Almassi, Manager, Conservation & Demand Management, Hydro One
Greg
Fergason, E.ON US (formerly Louisville Gas & Electric)
Many utilities spend months—even
years—researching and testing the right technology for their
demand response programs. Too often, the design of the program is given minor attention, when in reality design is the cornerstone of a strong demand
response program. This panel discussion will highlight how two utilities are working to
ensure maximum customer satisfaction with their DR programs.
11:15 a.m.
Moderator: Mike Stockard, TXU Electric Delivery
Demand
Response Solutions
Charles
Parsons, Director of Demand Response Solutions, Cannon Technologies
An overview and case study on Cannon
Technologies’ Load Response Center—a complete demand response platform
that encompasses all aspects of demand response including direct control to
price responsive smart thermostats to commercial/industrial demand bidding
Noon – Lunch
1:30 p.m.
Moderator: Katherine Johnson, KJ Consulting
Evaluating
Your Demand Response Program
Kevin
Monte de Ramos, Principal, Quantec, LLC
Duane
Larson, Sr. Manager, Portfolio Integration, PG&E
This session provides valuable information on the
importance of building evaluation metrics into the design of your energy efficiency and demand response
programs.
The following will be presented by Duane Larson of Pacific Gas &
Electric:
-
Overview of PG&E’s demand response programs
-
The importance of evaluation
-
The California performance metrics
-
Lessons learned in the evaluation process
-
New DR initiatives on PG&E’s horizon
2:15 p.m.
Moderator:
Katherine Johnson, KJ Consulting
Advanced
Metering Infrastructure and Demand Response
Matt Owens, Director, Product Line Management, Itron
With the Energy Policy Act of 2005 and continued technological advances
many utilities are now considering a major investment advanced metering technology. And in
many cases the benefits of demand response are a significant driver for
the investment. Matt Owens will discuss next generation advanced metering solutions and how
advanced metering helps enable a variety of demand response and alternative
energy solutions.
3:00 p.m.
A
quick break to get prepared for the fun (and slightly raucous) Power Meetings!
We will begin at 3:15 p.m.
3:30
– 5:30 p.m. Power Meetings
(Commercial Center)
Moderator,
Meg Matt, AESP
Back by popular demand!
This fast-paced event is guaranteed to be fun and informative.
It’s our version of speed dating. Meet
with all of the Technology Partners (each meeting will be under
6-8 minutes), and you’ll be eligible to win some great prizes (an iPod,
portable DVD player or a $150 gift certificate to Best Buy). The prize drawing will
occur during Friday’s opening session.
5:30
p.m.
–
7:00
p.m. Casino
Night and
Reception
hosted by Southern California Edison
Why mess with a good thing? This year the CTAC Casino returns with regulation-size blackjack and craps tables. Play for fun and prizes as
you enjoy SCE's hospitality.
7:00 p.m. Bus Transportation back to Hilton Garden Inn.
Friday,
October 13, 2006
7:00 a.m. or 7:45 a.m.
Catch
the bus to CTAC (leaving from the Hilton Garden Inn)
7:30 a.m. – 8:30 a.m. (Foyer)
Registration and Continental Breakfast
8:30 a.m.
And
the Winners Are! Mark
Martinez and Meg Matt draw the winners from the Speed Meeting event
8:45 a.m.
Moderator: Lori Megdal, Megdal & Associates
What’s
Happening with Energy Efficiency at Southern California Gas Company
Tom DeCarlo, Manager, Energy Efficiency, SoCalGas
9:00
a.m.
Moderator:
Lori Megdal, Megdal & Associates
How
do Energy Efficiency, Load Response and Distributed Generation Technologies
fit
into the Grid of the Future?
Elizabeth Hicks, Senior Principal, KEMA, Inc.
This presentation will provide an overview of what new features the
grid of the future will include and discuss possible new roles for energy efficiency, load
response, and distributed generation in managing the grid of the future. This discussion
will include new trends in communication and metering technology both to and from the grid and
customers. Several examples of how this technology is currently being used will be
presented.
9:30 a.m.
Moderator:
Lori Megdal, Megdal & Associates
Enhancing
the Value of Information Collected by Advanced Meters - Customer and Operational Perspectives
Harvey
Michaels, CEO and Co-founder, Nexus Energy Software
Significant momentum now exists to not only
reduce meter reading costs with advanced meters, but to utilize the hourly energy data
collected by these advanced meters to
support better load forecasting and control and improved customer
services. Advanced meters are now seen as part of an advanced energy delivery system,
which, when supported with analytic software, can deliver
improved quantity and
quality of information to guide both operational and customer decisions.
Case studies will be described at SCE, PG&E, Puget Sound Energy, Wisconsin Public Service, Idaho Power and Pepco
where analytic software
has been used to leverage hourly meter data, combined with customer
input, weather, and GIS to:
-
Help customers understand their bills and control their costs,
including support for time-differentiated rates,
such as critical peak rates, which charge their highest rate for a few hours
on a handful of days per year when loads are highest
-
Provide utilities with greater visibility into network loadings
down to the transformer level, as well as methods to improve forecasting,
settlement, and revenue protection.
10:00
a.m. Networking Break (Commercial Center)
10:30 a.m.
(Conference Center)
Moderator:
Dan Violette, Summit Blue Consulting
New Technologies & Program Strategies: Achieving Results at the
Least Cost
Howard Ng, Product Manager – Demand Response, Comverge
Let’s
face it, achieving results at the greatest cost-benefit ratio is often far
easier done on paper than in practice. Attend this session to gain valuable insight on
how new technologies (including “smart” thermostats and price-responsive systems) can be
leveraged to enhance overall
program performance and the customer experience. Co-presented by Demand Response pro Greg Fergason and one of the leading developers of
“smart” thermostat technology, Howard Ng, this presentation will leave you with key
takeaways for improving your existing program and/or designing your program of the future.
11:00 a.m.
Moderator:
Dan Violette, Summit Blue Consulting
Commercial Refrigeration and the Great
Potential for Energy Efficiency
Jim
Kitchen, Sr. Product Manager, Heatcraft
Heatcraft
Worldwide Refrigeration (HWR) is committed to providing customized energy
efficient solutions to fit the needs of commercial refrigeration customers through their Energy Solutions™ program. Jim Kitchen will discuss
the potential energy savings available in commercial refrigeration products and the current
energy-efficiency initiatives that are being developed and utilized.
11:30 a.m.
Moderator: Sue Nathan, Kansas City Power & Light
Implementing Large Scale Demand Response Programs: SCE’s Summer
Discount Program
John Roselle, VP of Marketing,
Corporate Systems Engineering
Paul
Notti, Western Region Sales Leader, Honeywell Utility Solutions
Corporate Systems Engineering and Honeywell are the two
main partners hired by SCE to deliver over 250 MW of load control over the
next 2.5 years. The Summer Discount program is the largest in the country,
originally planned for 180,000 switches. Edison has been recently directed by
the CPUC to accelerate this goal 1 year sooner than originally planned.
This session will feature a presentation by each company describing the
challenges of delivering such a large scale program, as well as the
collaboration efforts underway to help ensure the success of the program.
Corporate Systems provides the technology for Edison and Honeywell Utility
Solutions provides the turnkey delivery services for the SDP. 12:15 p.m. - Lunch
1:00 p.m.
Moderator:
Sue Nathan, Kansas City Power & Light
BC
Hydro’s Experience with ESP: Comprehensive Software Enabling DSM
Modeling, Planning and Reporting
Dave
Edwards, co-founder of CopperLeaf TechnologiesA key challenge facing DSM managers is
that traditional, custom-built spreadsheets do not adequately support the full range of increasingly complex
analytical and reporting demands required by executives, regulators and external interest groups. How do
utilities efficiently demonstrate that they are maximizing the return and value of their
sizable and increasing DSM investment dollars?
BC Hydro’s Power Smart group faced these challenges and looked to
CopperLeaf Technologies Inc. to help solve them with ESP. ESP is a strategic
Web-based enterprise DSM modeling, planning and reporting software package which supports end-to-end business needs of DSM managers throughout the entire DSM life cycle.
Since ESP was delivered to BC Hydro in 2005, it has been used to:
-
Model Power Smart’s 10 year, $600
million DSM Plan (with targeted savings of 3,600GWh/yr by 2011/12), which includes “actual” costs and
participation/savings that have been realized since 2002
-
Support BC Hydro’s 2006 Rate Case filing with the British Columbia
Utilities Commission and will be used to support its upcoming budget cycle
-
Justify individual DSM Program business
cases
-
Examine longer-term scenarios beyond the 10 year - 3,600GWh/yr target
to assess new and emerging technologies, potential legislative/standard changes, and
potential customer rate structures.
1:30 p.m.
Moderator: Mark
Martinez, Southern California Edison
Q&A
for All Technology Partners
2:00 p.m. -- Adjournment
|